Fuel Injector Clamp Bolt AG148 For Audi VW Seat Skoda 1.6 TDI WHT005490

Please check the part number against your part number if you are not sure it is the right item contact us.

The item will state:

New Reconditioned & Remanufactured are a properly rebuilt part which has been completely disassembled, cleaned and examined for wear and breakage. Worn out, missing or non-functioning components have been replaced with new or rebuilt components. It is the functional equivalent of a new part and is virtually indistinguishable from a new part. Please be aware you may be charged import duties in your country! Pumps and Injectors carry a 12 month warranty against manufacturing or remanufacturing defects, limited to the cost of the replacement part only.

M6 x 1.0, 98-99mm overall length,  37mm threaded length

The torque specification for the WHT005490 injector stretch bolt is a two-stage process: 

1. Stage 1: Tighten to 8 Nm.
2. Stage 2: Turn an additional 270 degrees (3/4 of a turn). 

This part number is a single-use stretch bolt for the fuel injector clamp on various VAG 1.4, 1.6, and 2.0 TDI Common Rail engines, and it must be replaced every time it is removed. 

Important Considerations:

• Always use a new bolt when installing the injector.
• Ensure the bolt hole in the cylinder head is completely clean and free of oil or fluid before installation to prevent damage (e.g., the bolt "hydraulicing").
• It is also recommended to install a new copper washer and seals when refitting the injector.